What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

Advantages and Disadvantages of Professional Shopping Cart Software

Advantages & Disadvantages of professional shopping cart software As e-Commerce is becoming a regular technique in the business industry it appears that more and more software development firms are developing professional shopping cart software to be released in the market. There is currently a huge range of free shopping cart software that has been released, and it seems that most e-Commerce website owners prefer these free systems over paid for professional shopping cart software. In this article we are going to look at the advantages and disadvantages of professional shopping cart software.

Advantages

• Even though you will have to pay for the solution, you get a cart package that has been fully developed, tested and used in the real working world by other e-Commerce websites. If the solution is used by a popular website service then the chances are it has been under more than enough testing to be deemed ready for use.

• Professional shopping cart software will be supported by the people who developed it. A lot of free solutions out there are simply developed and then discontinued as the freelance developers move onto their next project. Support is essential if you are going to want upgrades as mentioned in our next point.

• As the system is supported, the development team are likely to fix any bugs that may occur and provide patches and security fixes. This means the shopping cart software will only get better as time goes on and furthermore improve your e-Commerce website.

• Your site is likely to be more secure when using a professional software solution as in most cases the it developed house private content management systems. This improves security as public content management systems such as WordPress are constantly under threat from hackers as they try to compromise the free source code.

• Another huge advantage of using professionally developed software in e-Commerce is that they will already support a huge range of different payment options for your customers. There are various carts – that only offer PayPal for payment by standard, and it can take a very long time to find plug-ins or figure out how to add other methods yourself. With professional software you can save time and possibly money as it is all included.

Disadvantages

• Your e-Commerce venture might be a small time project and professional cart does cost money which you may not have. In this case you may have to make do with a free shopping cart solution. The good part of conducting business online is that after you have made profit with the free system you can reinvest your money to buy a professional package.

• You trust the developers to do everything they promise to ensure the best experience. It might be slightly difficult to use at first and you might have to spend some time getting used to the bespoke system. You also have to understand that you are vulnerable until patches are made if a security flaw is found.

Posted in general | Comments Off on Advantages and Disadvantages of Professional Shopping Cart Software

How To Select The Best Credit Repair Software

Credit repair software tools are available to assist both credit repair agencies and/or individual consumers with credit repair. Ideally, such repair software is user-friendly and allows the user to point and click to a series of questions, and subsequent options, to engage in the process of credit repair by challenging credit reports from the major credit bureaus.

There are many software companies to choose from. Some claim to be the “best” while others claim to have the “absolute best credit repair software on the planet.” They all provide a unique service with even more unique and distinct features. The issue that you need to consider most when selecting credit repair software is which feature set will benefit you the most. So let’s take a look at steps that will help you select the proper software package for you.

1. Try to find a product with good technical support. A proper credit repair software program behaves like other expert software. This means 24/7 technical assistance, recurring software updates, sufficient help/manual documentation, etc.

2. Your credit repair software must adhere to your personal needs. A lot of these products have numerous add-ons, bonuses and other things which you would be paying for, but may not need. For example, some vendors cater to credit professionals, so they have functionalities on client management, etc, which you don’t need as a home user. On the other hand, you might need financial tips or the automatic reminder system.

3. Keep in mind, that you may have to write letters and that you are a unique customer with a unique address, account number, social security number, and story behind your dispute, which will have to be inside the letter. This single activity will take you many hours to complete. Try to find a software that already has pre-loaded dispute letters. Then once the software has automatically extracted those disputes from the above mentioned credit report providers, this software will in turn suggest the appropriate dispute letter automatically within just a few seconds. Just imagine the hours, and amount of money you can save by just this feature alone. Most people have to hire or outsource this kind of work because their software does not do it automatically. So not only will you save time but you will also save money by not having to outsource the work.

4. Rank available packages through analyzing pros/cons/cost. Once you have a short list of possible software packages, try to rank them by analyzing the pros and cons of each, as well as comparing the cost to your budget.

5. See if there is a trial period for the software that you select. Now that you have selected which package you feel would be the best fit for you, make sure that there is a money back guarantee so that you can return it if you are not satisfied with the performance.

The more you work on your credit repair, the more that it will demand of your time. This is why it is extremely important to choose the best credit repair software available to help you automate the process as much as possible. Choosing the right software package for your needs can save you lots of time. Working with automated software can be compared to driving a car to a distant destination, versus walking there. One way will be significantly faster than the other. Repairing your credit will be much more difficult if you are not using an organized system.

Posted in general | Comments Off on How To Select The Best Credit Repair Software

Surviving Missing Futon Frame Hardware Nightmares

There seems to be quite a few of us who have owned a futon frame and ended up losing the connecting hardware at one time or another. I myself bought a futon from the retail store I worked in for a number of years back in the early 1990s when futons were all the rage. Maybe you purchased your futon in college, purchased it from a friend or maybe made the purchase for a family room. If you're lucky to live out your life in the same house or apartment there will never be a need to move your futon except except to a different room or location. Obtaining replacement futon frame hardware involves several steps approached in order to locate exactly what you need.

In the first place do not panic just yet. Without the hardware to attach everything back together you're in some serious trouble. However there are ways to obtain what you need. At this point we could explain the many benefits of using a small bag to contain the hardware and attach it to a part of the frame with heavy packing tape so it's easily found. Who am I kidding though? I've moved mine now about three times and each time I ended up missing a bolt, a barrel nut, a nylon roller here and there. Heck, I was lucky I had all the wood components show up at each new move let alone any hardware that happened to make it as well. Besides, is not moving your home stressful enough without having to keep track of a small bag of metal hardware among a sea of ​​furniture, clothing, dishes, toys and appliances?

Pursuing this further we must calmly step back and think for a moment. Yes, we're stressed out and fuming at either our spouse or the moving company for losing the futon hardware but we need to move past that now. To be sure the futon needs our help and we're the only ones who can do it at this point. It's time for us to go through the steps of obtaining replacement hardware and there is a specific order in which we do this to obtain the fastest results. I would suggest the following steps to start tracking down replacement hardware as soon as possible.

First – identify your futon frame.
Having worked retail, it's quite possibly the toughest situation when a customer comes into the store requiring assistance but can not identify the product to the salesperson or service individual when requesting parts. Granted you're going to have to do a little research by pulling your receipt when you bought the futon from the store and identify the model or name of the futon. If you inherited the futon, found it by the side of the road or bought it at a garage sale you're in for a tough road ahead. Fear not however as the internet can be used to help you find the design and attach a name to it for use in tracking down hardware. Be aware that there are dozens of manufacturers out there using different hardware in their frames including many that have since closed their doors. Hopefully the manufacturer of your frame is still around.

Second – speak to the retailer.
Of course if you purchased your futon frame through a local retail store it's time to head down there and see if they can track down the hardware for your frame. Bring your receipt. If you do not have a receipt, then bring an image of the futon frame with you. Hopefully the salesperson or service representative is knowledgeable about the products that they've carried in the past. Best case scenario, they either can provide you with the name of the manufacturer with contact information or have the parts on hand to get you back up and running. Worst case scenario the store you purchased it is out of business or if the store is still around they have no clue about the product anymore.

Third – search online.
Supposing we've hit the worse case scenario it's time to use the web to search for the manufacturer or the name of the style of futon you have. I'd suggest using Google, Bing or Yahoo and use the name adding the word futon to the search. If you were not able to locate a name you're going to have to become a very good spotter and sift through the many images of futon frames till you find one that is very close to what you have. Identify the name of the style and the manufacturer and then proceed to locate the manufacturer of the futon frame.

Fourth – speak to the manufacturer.
Assuming the retailer did not have parts but could identify the manufacturer for you then at least have something to go on. Perhaps you were able to locate your frame style through the search engines. Again, search online using the websites previously discussed using the name of the manufacturer. You'll likely get some online retail stores off of the search. Filter them out visually until you find a link for the manufacturer. Most do have websites, locate a contact phone number or email address and contact them for information on obtaining hardware. If you're unable to locate the manufacturer's website go ahead and contact one of the many futon stores that pop-up in the search results and email them with your issue and ask if they can either sell you hardware or point you in the right direction For finding the manufacturer in hopes of tracking down hardware.

Finally – the last resort.
If you were unable to determine the name of the futon frame or the name of the manufacturer you are indeed in a tight spot. At this point your options are limited to heading down to a hardware store and seeing if you can locate some generic parts that might get you back up and running. The problem will be in the way of connecting bolts and barrel nuts and getting the right lengths if available. I would suggest taking one of the wood arms and a stretcher rail with you to the store. Begin plugging in different bolts and nuts till you find a combination that connects correctly. You'll also need to track down connecting pins, washers and clips for the seat and back section as well as the four nylon rollers that most futon frames use on the back rest. If you're lucky these may still be attached to the backrest deck making your job a bit easier.

In conclusion we've discussed the issues presented with lost futon hardware and how to go about tracking down the hardware you need. Basically identify your frame through a receipt or spotting it online. Visit the retailer store you purchased it from and obtain parts through them if they are still open. If you purchased it privately or inherited the frame track down the manufacturer using a search engine of your choice and speak to them about ordering replacements. If you are not able to locate the manufacturer but have found stores online contact one of them to see if they can sell you hardware. If all else fails visit the local hardware store with your wood futon sections in hand and begin trying bolts and nuts till you find some that work. I sincerely hope you're able to obtain the needed hardware to get your futon frame back up and running. I wish you the best of luck to you and your futon.

Posted in general | Comments Off on Surviving Missing Futon Frame Hardware Nightmares

How Are Brains Different From Computers?

Ever wondered how brains are different from computers? This article shows how. Read on to find out.

Brains consist of cells called neurons and they connect with millions of other neurons and information gets transferred across connection gaps called synapses. Inside the cells data are processed which gives rise to an idea, concept or understanding.

Computers are built of hardware chips and the central processing unit (CPU) processes data after receiving them from the other chips. How it processes data conss of several steps but the main outline is that software programs are fed into the CPU and processed. They provide end result information depending on how the programs are furnished with data and what the query is that fed into the system. If some information is asked that is outside the scope of the software programs, the computer gets limited in functioning.

Brains, however, are limitless. From childhood until adulthood, the brain gets more and more developed and mature. It can process unknown data or abstract data as well and provide insights and knowledge.

The brain is more complex than the CPU and therefore, with neurons and synaptic connections, it is possible to process all kinds of information. It uses the five senses: touch, smell, hearing, taste and sight and takes in information and produces knowledge.

On the other hand, the CPU of computers takes in data from the typing of the keyboard and processes it, which is very limited. However, it is only human beings feeding data, writing software programs and making the computer like like a brain although not quite so.

The brain is still more intelligent than the CPU of computers and has yet to train the computer to have like the brain of a human being.

Yes, computers will be able to take over many tasks of human beings but without human beings, they are lifeless because humans have to give life to these computers, operate on them and have regular updating, monitoring and maintenance on them.

Just as a brain needs to rest and relax, computers will also need that from time to time but they can operate longer times than the average brain. While the brain sleeps, the computer can carry on with its duties of processing data and converting them to knowledge and information.

Summing up, although the CPU is sometimes called the brain of the computer, it is actually a misnomer because as I have outlined in this article, the brain is definitely different from the computer in varying ways and the brain has yet to teach the computer to Behave 100% like a brain.

Posted in general | Comments Off on How Are Brains Different From Computers?

Wide Area Network (WAN)

Types and Characteristics of WANs

What is a WAN?

There are two prevailing definitions of a Wide Area Network (WAN). The book definition of a WAN is a network that spans large geographical locations, typically to interconnect multiple Local Area Networks (LANs). The practical definition of a WAN is a network that traverses a public network or commercial carrier, using one of several WAN technologies

What are its Main Components?

The main components for a WAN are routers, switches and modems. These components are described below in the hardware section.

CPE – Devices on the subscriber contracts are called customer premises equipment (CPE).
The subscriber owns the CPE or leases the CPE from the service provider. A copper or fiber cable connects the CPE to the service provider's nearest exchange or central office. This cabling is often called the local loop, or "last-mile".

DTE / DCE – Devices that put data on the local loop are called data circuit-terminating equipment, or data communications equipment (DCE). The customer devices that pass the data to the DCE are called data terminal equipment (DTE). The DCE primarily provides an interface for the DTE into the communication link on the WAN cloud.

Hardware

In a WAN you will need various types of hardware components for it to function. The typical items of hardware that you will need in a WAN are:

Router – An electronic device that connects a local area network (LAN) to a wide area network (WAN) and handles the task of routing messages between the two networks. Operates at layer 3, and makes decisions using IP addresses.

Switch – A switch is a network device that selects a path or circuit for sending a unit of data to its next destination. Operates at layer 2, and uses MAC addresses to send data to correct destination.

Modem – Short for modulator / demodulator, a modem that enables a computer to communicate with other computers over telephone lines. Operates at layer 1, where signals are converted from digital to analogue and vice versa for transmission and receiving.

Wan Standards

WANs operate within the OSI model using layer 1 and layer 2 levels. The data link layer and the physical layer. The physical layer protocols describe how to provide electrical, mechanical and functional connections to the services provided by the ISP. The data link layer defines how data is encapsulated for transmission to remote sites.

Encapsulation

Encapsulation is the wrapping of data in a particular protocol header. Remember that WANs operate at the physical layer and the data link layer of the osi model and that higher layer protocols such as IP are encapsulated when sent across the WAN link. Serial interfaces support a wide range of WAN encapsulation types, which must be manually specified. These types include SDLC, PPP, Frame delay etc. Regardless of WAN encapsulation used it must be identical on both sides of the point to point link.

Packet and Circuit Switching

Circuit switching and packet switching are both used in high-capacity networks.
The majority of switched networks today get data across the network
Through packet switching.

Circuit-switching is more reliable than packet-switching. Circuit switching is old and expensive, packet switching is more modern.

General Routing Issues

What is a Routing Protocol?

A routing protocol is a protocol that specifies how routers communicate and exchange information on a network. Each router has prior knowledge of its immediate neighbors and knows the structure of the network topology. The routers know this because the routing protocol shares this information.

Protocol

RIP (Routing Information Protocol) was one of the most commonly used protocols on internal networks. Routers use RIP to dynamically adapt changes to the network connections and communicate information about which networks routers can reach and the distance between them. RIP is sometimes said to stand for Rest in Pieces in reference to the reputation that RIP has for breaking unexpectedly and rendering a network unable to function.

Routing Algorithms

Distance Vector

This type of routing protocol requires that each router simply inform its neighbors of its routing table. The distance vector protocol is also known as the bellman-ford algorithm.

Link State

This type of routing protocol requires that each router maintain a partial map of the network. The link state algorithm is also know as Dijkstra's algorithm.

IGRP

IGRP is a type of distance vector routing protocol invented by cisco used to exchange routing data in a autonomous system. Distance vector protocols measure distances and compare routes. Routers that use distance vector must send all or a portion of their routing table in a routing update message at regular intervals to each neighbor router.

Addressing and Routing

What does routing mean?

Routing is the process of deciding how to move packets from one network to another.
The directions also known as routes can be learned by a router using a routing protocol then the information is passed from router to router along the route of the destination.

IP Address's

Every machine connected to the internet is assigned an IP address. An example of an IP address would be 192.168.0.1. IP addresses are displayed in decimal format to make it easier for humans to understand but computers communicate in binary form. The four numbers that separate an IP address are called Octets. Each position consists of eight bits. When added to together you get 32 ​​bit address. The purpose of each octet in an IP address is to create classes of IP addresses that can be assigned within a network. There are three main classes that we deal with Class A, B and C. The octets of an IP address are split into two parts Network and Host. In a class A address the first octet is the network portion, this determinates which network the computer belongs to, the last octets of the address are the hosts that belong to the network.

Sub netting

Sub netting allows you to create multiple networks within a class A, B or C address. The subnet address is the address used by your LAN. In a Class C network address you would have a subnet mask of 255.255.255.0. A subnet mask identifies which portion is network and which is host. For example 192.168.6.15 the first octet three octets are the Network address and the last octet being the host (Workstation). It is important to subnet a network because gateways need to forward packets to other LANS. By giving each NIC on the gateway an IP address and a Subnet mask it allows the gateways to route packets from LAN to LAN. Once the packet arrives at its destination, the gateway then uses the bits of the subnet portion of the IP address to decide which LAN to send the packets.

Circuit Switched Leased Lines

A circuit switched network is one that establishes a dedicated circuit (or channel) between nodes and terminals before the users may communicate. Here are some terminologies associated with a Circuit switched network.

Frame relay is a telecommunication service designed for cost-efficient data transmission between local area networks (LANs)

Basic rate interference is a service used by small business for internet connectivity. An ISDN BRI provides two 64 Kbps digital channels to the user.
Primary rate interface (PRI) is a telecommunications standard for carrying voice and data transmissions between two locations
All data and voice channels are ISDN and operate at 64kbit / s

Packet Switching

Http://www.raduniversity.com/networks/2004/PacketSwitching/main.htm – _Toc80455261

Packet switching refers to protocols in which messages are broken up into small packets before they are sent. Each packet is then transmitted over the Internet. At the destination the packages are reassembled into the original message. Packet switching main difference from Circuit Switching is that that the communication lines are not dedicated to passing messages from the source to the destination. In Packet Switching, different messages can use the same network resources within the same time period.

Http://en.wikipedia.org/wiki/Asynchronous_Transfer_Mode

Asynchronous Transfer Mode (ATM) is a cell relay, packet switching network and protocolwhich encodes data into small fixed-sized cells.

ISDN is used to carry voice, data, video and images across a telephone network. ISDN stands for integrated services Digital Network. Isdn also provides users with a 128kbps bandwidth. This is done through frame relay. Frame relay complements and provides a service between ISDN, which offers bandwidth at 128 Kbps and Asynchronous Transfer Mode which operates in somewhat similar fashion to frame relay but at speeds from 155.520 Mbps or 622.080 Mbps. Frame relay is based on the older X.25 packet switching technology and is used to transmit analogue signals such as telephone conversations.

PSDN stands for packet switched data network and is a data communication network. Packet switched networks do not establish a physical communication signal like the public telephone circuit (circuit switched network) Packets are sent on a fixed length basis and assigned with a source and a destination address. The packages then explicitly on the routers to read the address and route the packets through the network.

Mobile and Broadband Services

Digital Subscriber Line (DSL) is mainly used to bring high bandwidth connections to homes and small business's over a copper wire telephone line. This is can only be achieved if you stay within the range of the telephone exchange. DSL offers download rates of up to 6mbps allowing continuous transmission of video, audio and 3D effects. DSL is set to replace ISDN and compete with the cable modem in providing multimedia to homes. DSL works by connecting your telephone line to the telephone office over copper wires that are twisted together.

Asymmetric Digital Subscribers Line is most commonly used for home users. It provides a high download speed but a lower upload speed. Using ADSL, up to 6.1 megabits per second of data can be sent downstream and up to 640 Kbps upstream.

Http://en.wikipedia.org/wiki/Symmetric_Digital_Subscriber_Line

Symmetric Digital Subscriber Line is a digital subcriber line which runs over one pair of copper wires. The main difference between ADSL and SDSL is the difference in upload and download speeds. SDSL allows the same upstream data rate and downstream data rate as ADSL upstream can be very slow.

[Http://searchnetworking.techtarget.com/sDefinition/0],,sid7_gci558545,00.html

HDSL High bit-rate Digital Subscriber Line, one of the earliest forms of DSL, is used for wideband digital transmission within a corporate site and between the telephone company and a customer. The main characteristic of HDSL is that that provides equal bandwidth in both directions.

IDSL is a system in which data is transmitted at 128 Kbps on a regular copper telephone line from a user to a destination using digital transmission.

The Local Loop enables operators to connect directly to the consumer via copper local loops and then add their own equipment to offer broadband and other services. This process involves operators accessing local exchange buildings to connect to a network of copper lines which connect them to homes and businesses. BT is an Example of a Local Exchange. The local loop connecting the telephone exchange to most subscribers is capable of carrying frequencies well beyond the 3.4 kHz upper limit.

Benefits of using DSL

DSL can provide a virtual instantaneous transmission of voice, data and video over ordinary copper phone lines. A DSL connection can eliminate delays while waiting to download information and graphics from the Internet. It provides users with a cost effective high speed Internet connection. Another benefit is that a DSL connection is always on-line (like a LAN connection) with no waiting time for dialing or connecting.

There are now more than 10 million broadband connections in the UK. By December 2005 there were 9.792 million broadband connections in the UK and the average broadband take up rate during the three months to December was more than 70,000 per week.

Posted in general | Comments Off on Wide Area Network (WAN)

Kitchen Design Ideas

Kitchens have so many design options that they are literally never ending. Kitchen design ideas include features such as cabinetry, tiles, counter tops, appliances, hardware and fixtures. Each feature on its own has a multitude of design options and the possible combinations are endless. Two identical kitchens with only one different feature can look like very different kitchens when finished. Because of the vast number of design options, thoroughly research what products are available on the market and get a fairly good idea what it is you are looking for.

The main feature in any kitchen is the cabinetry. It is more often than not the first thing that people notice in a kitchen. The layout of the cabinetry is unique to each kitchen. Measure the size of your kitchen and determine the types of cabinets and where you would like them placed. If you have a solid wall with no windows, doors or appliances opt for floor to ceiling cabinets full of drawers for storage. Include a broom or cleaning closet in these cupboards. Glass fronts in corner cabinets are a popular design feature. Cabinets have a wide variety of door styles. There are recessed, flat paneled and raised cabinet doors. Each of these options comes with several design choices. Once you have picked the design of your cabinets you need to decide on the stain that suits your kitchen space. Opt for lighter colored stains for smaller kitchens to keep them feeling open and spacious.

Counter tops are also an important feature in a kitchen. They too are highly visible. Counter tops should be chosen for durability as well as looks. Granite counter tops are the most popular choice today. You may also choose from engineered stone, ceramic tile, laminates, wood and stainless steel. The material and color of your counter tops should compliment your cabinetry, backslash and tiles. If your kitchen is a large room but does not have a lot of counter space you might want to consider adding an island for additional space. Not only does an island adds counter space but also storage space.

Flooring is an integral kitchen feature. Most kitchens are done with ceramic tile flooring but wood floors and laminates are growing in popularity. Many kitchens have tiled backslashes. Be sure that the tiles used in your backslash compliment the flooring. Besides the type of flooring you use, you must also pick a color of tile, wood or laminate as well as texture. Quite often a kitchen with light colored cabinetry will look best with a slightly darker floor and vice-versa. Contrast between the cabinetry and the flooring, no matter how small, creates the illusion of depth.

The kitchen design ideas listed above are just the tip of the iceberg. We have not even touched on cabinet hardware, lighting fixtures, sinks and taps, paint colors or appliances. Matching appliances are ideal in any kitchen. Stainless steel appliances are a favorite because they match just about any kitchen design. Families with small children may wish to consider black appliances since stainless steel shows fingerprints. Put as much thought into the small features as you do the larger ones. Something as simple as buying the wrong cabinet hardware can ruin the look of the completed project.

Posted in general | Comments Off on Kitchen Design Ideas

Understanding the Significance of Computer Hardware

We are living in an age that is highly influenced by technology. Most of the activities we need to do now are automatic or computerized. Of all the technological developments achieved in the recent past, one significant tool that got developed and which will certainly keep influencing our lives is the computer. You would agree that computers play a very basic role in our daily life, just like the television and the cell phone. We are already at a stage where life will be difficult without a computer. That makes it important to understand the way a computer works, and then be informed of what we should do if it stops working. The most important part of any computer is its hardware, in the absence of which it just can not function.

If you are really keen to assess what has gone wrong with your computer when it stops working, you should understand the working and constituents of its hardware. You should especially have solid knowledge about the computer hardware when you want to undertake its troubleshooting on your own. One important part of the hardware is the RAM memory of any computer. For running any program or application, any computer needs a RAM memory. Other than that, if the computer has a RAM with specifications that are not compatible with the programs it is expected to run, its operation will be slowed down and it would almost crawl. When choosing a computer, you need to ensure that its hardware is not outdated, otherwise you'll have to upgrade it in order to be able to use the intended program.

You must take certain basic precautions while handling the hardware of computers. The most essential precaution is to ensure that the power supply to your computer is switched off, else it could cause an electric shock. Then, before you touch any part within the computer, ensure that you are not carrying any electric charge by connecting to a grounded piece of metal or you may procure an anti-static mat or wrist band available in the market. While inspecting the hardware components, you should look for broken or damaged component, as these are most likely the reasons for the computer malfunction. If a component does not fit in the slot, you are probably trying to fit it in the incorrect slot.

Once you know the hardware employed in your computer and the role it plays in the functionality of your computer, you'll be in a position to undertake its troubleshooting when it malfunctions. Each piece of hardware contributes to the successful function of the computer. To a large extent, the working of a computer depends on the quality of its hardware, making it imperative to keep it in good condition.

Posted in general | Comments Off on Understanding the Significance of Computer Hardware

Why Architectural Drafting Is Common in Architectural Design

For architectural design projects, while there is the emphasis on using 3D models and architectural BIM modeling, the time-tested practice of using architectural drafting and 2D technical drawings is still commonplace in the AEC industry. Architectural drafting has evolved from the drawing board to computer-aided design and drafting (CAD) software programs. Drafting practices help to provide architectural construction drawings that include the technical details of architectural, structural and electrical elements required for the construction of a building. To understand the stage at which architectural drafting takes place, the workflow of a building design lifecycle must be considered.

The basic workflow of an architectural design project starts with the architect creating a conceptual plan which is usually modelled into architectural 3D models and rendered as photorealistic images for marketing and presentation to clients and customers.

Once the conceptual design is approved by the client, the design is then progressed into more detail and shared with other parties such as structural and MEP engineers. The way in which the design is progressed for the ‘design development’ phase by an architect lends itself to two options, either to develop a 3D model with more detail and then create subsequent sheets and details using a 3D tool such as Revit or AutoCAD, or as is still commonplace, to develop the concept design in 2D using more traditional methods. From the conceptual plans provided by architects and engineers, a drafter can convert these designs using CAD software programs to create technical drawings.

Architectural drafting is the process of creating technical drawings which include the floor plan, sections, elevations, detailed drawings and other documents in a construction drawing set (CD Set), which are typically required for the construction of a building.

The difference between Architectural Drafting and Modelling

Architectural drafting refers to creating 2D technical drawings and architectural construction drawings which are mainly used by contractors and consultants on site. Architectural 3D modelling refers to creating 3D models and renders of photorealistic images which are mainly used to present the architectural design for marketing purposes and then progressed from there to create the 2D technical drawings, in effect feeling like an extra stage (the 3D modelling element). The main software used for drafting, to create 2D technical drawings is AutoCAD while modellers use Revit and ArchiCAD to create 3D models and rendered images. Architectural draftsmen need to have basic 2D and 3D software knowledge such as AutoCAD and knowledge of technical codes and drafting guidelines specified by organisations such as American National Standards Institute (ANSI), American Society of Mechanical Engineers (ASME), American Design Drafting Association (ADDA), Public Works Government Services Canada (PWGSC), National Institute of Building Sciences (NIBS), BSI British Standards Institute and Standards Australia Code AS1100. Architectural modellers need to have a deeper understanding of architectural, building and construction concepts and experience with 3D software programs such as Revit and ArchiCAD.

Why Architectural Drafting is still Common in Architectural Design Practices

Architectural 3D models are preferred by architects and designers because they provide a 3D perspective of the conceptual plan of the building; it makes management of project data easier and allows for design changes on the go. However, construction companies that require technical specifications of the architectural project prefer 2D technical drawings and architectural construction drawings because they provide accurate details required for construction, most of the resources involved in construction understand 2D drawings, there are no issues with compatibility of software as compared to when using 3D models and it is a suitable solution to meet the budgetary requirements of a construction project. Some of the reasons why architectural drafting is preferable by several construction companies include:

• Suitable as per construction requirements – In some building projects, 2D technical drawings or architectural CAD drawings are sufficient to complete construction, where additional information that 3D models provide is not required. A construction drawing set (CD set) includes all the floor plans, elevations, sections and detailed drawings required for construction. Technical codes, symbols and other additional information such as the type of material are provided in technical drawings. Therefore, construction companies find 2D technical drawings sufficient to successfully complete construction.

• Availability of technical resources – Not all companies have technical resources to deliver 3D models. While drafting teams are qualified to work on AutoCAD to deliver 2D technical drawings, they may not be qualified to work on Revit to deliver 3D models. In the construction industry, the availability of drafting teams who can provide 2D technical drawings is ample compared to companies that provide 3D modelling services.

• Availability of software – The adoption of new software and practices is gradual and slow in the construction industry. The software used in building projects varies from country to country. Some countries use ArchiCAD and AutoCAD Architecture instead of Revit, therefore leading to the incompatibility of project data. 2D technical drawings in AutoCAD are widely used and compatible making it a preferred option to Revit 3D models.

• Suitable as per cost and budgetary requirements – In most cases, construction companies do not find the need to invest more in 3D models, when drafting solutions provide detailed technical drawings which are sufficient and relevant enough for construction. There is also the added investment in resources that are competent enough to understand and implement architectural 3d models on-site.

While architectural 3D modelling and BIM modelling provide design-related information typically required for architects and designers in the design stage of the building project lifecycle, architectural drafting provides technical drawings that are not just about aesthetics but about high-performance detailing of construction elements. Architectural CAD drawings specifically communicate the design intent and help in the construction of buildings which companies find relevantly sufficient over 3D models. Even as construction companies will need to eventually evolve to combining the use of 2D technical drawings and architectural 3D models until then, the time-tested practice of using architectural drafting and drawing solutions in construction is here to stay.

Posted in general | Comments Off on Why Architectural Drafting Is Common in Architectural Design

The Advantages and Disadvantages to Bug Tracking Software

Bug tracking has been around as early as the 1940’s, just not in a software form. In these early days, simply using a pen and a paper created tracking systems. It evolved from then to using spreadsheets. Now there is bug tracking software like the defect tracking tool and even more specific programs like Mantis and Bugzilla, just to name a couple. As with anything that evolves however, there will always be those that are 100% for the programs and those that are against it. This article will cover all claims – both positive and negative – of bug tracking software like the defect tracking tool.

The Positive Claims

It certainly depends on the type of bug tracking software that is used, but it seems as if there are many more advantages to these tools than disadvantages. The most obvious advantage is that these types of tools allow companies to keep a record of the issues that are recorded, who fixed them, and even how long it took to fix the issue for some types of programs. Customers are encouraged to be as detailed as they can be when requesting that an issue be fixed so that companies can complete their requests as quickly as possible. The fact that the issues are recorded and saved is a huge benefit for the companies because sending the recorded bug list with the purchased software is a common practice. This is a benefit to customers because if it is a common error, they can simply look up this issue in the previously recorded bug list. However, if the list is incredibly long (a common disadvantage) it can become more of a hassle.

The Negative Claims

As with anything that has a list of positive aspects there is also a list of negative aspects, though there are few. One of the biggest complaints is not so much from the bug tracking software or defect tracking tool itself but more from the process of submitting issue requests. Customers need to be extremely detailed with their issue requests if they want a detailed response. Miscommunication isn’t a fault of the product, the customer, or the company – it’s simply something that happens. Customers and companies alike both need to remember to be patient with each other and to treat each other with a mutual respect. A second complaint that was previously mentioned is the length of issues in some of these software programs.

Some customers don’t have the patience to look through a long list of software issues that have been previously recorded and this causes frustration among the companies that took the time to purchase software that saves them. The length of issues that are submitted can also become a problem because if there are too many issues submitted and not enough engineers to address them, some can get overlooked. Nobody likes to be forgotten, but usually these types of bug tracking software include detailed instructions and are easy to use.

Usually when a company purchases a bug tracking software or defect tracking tool it already has an experienced IT department in place. Whatever the software is that is being used with these programs should have some sort of backup for when the work is completed so it does not get lost if the issues that occur are deadly.

Posted in general | Comments Off on The Advantages and Disadvantages to Bug Tracking Software